Showing posts sorted by relevance for query old town canoe. Sort by date Show all posts
Showing posts sorted by relevance for query old town canoe. Sort by date Show all posts

Sunday, May 10, 2009

Old Town Canoe Revisited


A few months back, I showed you some pictures of a 20 foot Old Town canoe I acquired in a trade. (Can't seem to resist a good trade!). My intention was to work on it over the winter, but I'm just getting back to it now.

This Old Town is an older model #172538/20 which, near as I can tell, is around 1960. There are extensive records on these canoes, so the actual build is available (I'll find it when I get time!) The Old Town Canoe Company Build Record Archive Project indicates that 2% of all Old Town Canoes are 20 footers.

The story is that the 20 foot freight canoe may have been used in the Vietnam War for reconnaissance in river deltas. This is a lively story, but I doubt this canoe has seen such rough treatment.





You can see that it's a stout boat, with half ribs in the bottom that are so close, it's almost filled in solid between the full ribs. There are two cracked ribs, which I plan to ignore, since there seems to be little loss of structural strength. The original canvas skin was replaced a long time ago with a polyester fiberglass coating. I considered stripping the 'glass off, but decided against it when I found it adhered so well the wood stripping was damaged trying to remove it. The 'glass had been applied carelessly and not fared out, so I sanded and sanded and sanded. Then recoating with epoxy restored the hull to very acceptable condition.

Now the canoe is right side up and the real challenge has begun. It was originally varnished inside, which is good since several subsequent coats of paint scrape off the old varnish easier than if the paint had soaked into the wood. Some of the wood hull strips have softened, especially where water was allowed to sit in the bottom of the boat.




Spruce is a very soft wood and deteriorates rapidly when exposed to weather. I'll probably coat the inside of the canoe with penetrating epoxy before varnishing, to restore some structural strength to the wood fibers and seal against further weathering.

The shear guard was a black plastic composite material which turned to shards when removed. Believe me, the boat looks better with no guard at all! I have some very pretty Oboto mahogany that will look just super as a shear guard.
I intend to cane the seats. I re-caned some antique chairs years ago, it wasn't too difficult, it looks good and will be authentic to the original.

This is a big canoe, nearly three feet, extreme beam! It takes three people to carry it, and no doubt it would hold an expedition worth of gear with no effort. As my readers know, pulling boats are more my style, so hopefully someone will come along who really loves this boat and offer me a good trade!




Sorry, I will not be replacing the hand painted decals on the bow (a duck in flight, on the port and a bear fishing, on the starboard)!

Sunday, November 16, 2008

Old Town Canoe



DoryMan recently acquired a 20 foot Old Town freight canoe. The story seems to be that the Navy used these heavy, stout canoes for reconnaissance missions in Vietnam. Whether or not this is true, the canoe was indeed well built and had seen some extensive use. The original canvas skin had been removed and replaced with a coat of polyester impregnated fiberglass.
The fiberglass was applied thick and never fared out, but has good adhesion. Removing the 'glass promised to damage the wood sheathing, so repairing the old coating seemed the best course of action.
The surface was sanded to remove the uneven excess material and two coats of epoxy resin, with the occasional filler, fared back to prepare for paint. After two coats of "easypoxy" paint the canoe is ready to turn over for interior repairs.

Wednesday, September 16, 2009

Old Town Freight Canoe


The work on this old canoe is progressing slowly. An interesting thing happens when working on a highly detailed project.
After days and weeks of scraping and sanding, pounds of paint material have been removed from between each of many frames inside the canoe, but to me the change has happened over many months and thus nearly indiscernible.

At first the interior was a dark brown and underneath was a layer of gray over a layer of old varnish. The result of all that sanding and scraping can be seen here.







When several coats of epoxy and varnish had been applied, the new shear guard was bent on. I used an African species of mahogany called Oboto which is beautiful, but rigid for this application and gave some resistance.




A bit of persuasion with a satisfying result, don't you agree?

The layers of glue on those clamps attest to their value in this man's shop!












The outside of the hull had been recovered with fiberglass years ago, and has been fared and painted. One more coat will finish the job and the final new color will be green, in keeping with Old Town tradition.














Presto!

Wednesday, December 9, 2009

Doryman's Boatyard


Tweezerman has asked the question and henceforth I am not responsible.
Since the addition of Lively to the fleet, the question is "how many?"
When the weather was sunny, I wanted to take a turn around the Doryman boatyard with a video camera, but when the weather is warm, Doryman is either working or sailing on a boat.

So, as the (unusual) freezing weather takes hold here on the coast, we'll take a pictorial tour instead. (It's pretty hard to build boats when it's 20 degrees F)


First is the bateau Huckleberry. She's a take on John Harris' Peace Canoe.When building Huckleberry, I thought I would shorten the canoe as planned, so that it would be the length of two sheets of marine grade mahogany plywood, thus saving the price of the remaining sheet.








The plans call for installing the sheer guard and chine log to the side panels before completing the boat. I used an African mahogany called Oboto, which resisted bending so much that Huckleberry ended up with a transom. Thus are new designs made!








Next up is the wherry yawlboat Lamb Chop. She is built of Port Orford cedar on yew wood frames. This little tender was used on the island of Nashawena in Massachusetts to rescue sheep who had fallen on the beaches and bring them to higher ground. Because of this, the boat has come to be known as the "sheep boat". Thus; Lamb Chop.
Pete Culler, famous for his yachty interpretations of working boats is responsible for this little wherry yawlboat.
































The Rhodes 33 Caper is a project in process. This classic boat is an orphan waiting to be loved. I am keeping her alive with infusions of TLC during the summer months that allow work outside. If I were a younger man, this fine old vessel would get a complete work-over, she deserves the best! Hopefully someone will take her to a good home. She is planked with African mahogany over oak frames.



















Love of my life! The Pete Culler Good Little Skiff Paku! She came to me as a pile of boards and with two years of loving restoration, this is the result. Constructed of cedar planking on mahogany frames, with a cross planked bottom of African mahogany, Paku is a durable skiff and beautiful, too.
Once again, Pete Culler outdoes himself.

She leaves me speechless.
























Sandy Douglas designed the Thistle racing dinghy in 1945 and this is hull #16 of that one-design class. Sweet Sixteen was built in 1946, the first year of Thistle production and was another old boat on the skids. It took three months of research to learn how she was originally designed. One-design rules dictate that the boats be held to a strict standard to be raced. There is no reason this 63 year old wood boat would not be competitive with a modern Thistle (made of plastic). She's a dream to sail, but I have to sell her. Can't keep 'em all, I guess!
























Mistral is my self designed/built 36 foot, five ton cruising dory. The design for this boat was conceived in 1989 and construction started in 1990. From then until now, I figure there are about 12,000 hours spent on her. The greatest fault with taking twenty years to build a boat is all the changes that can happen to the boat, and to the builder! The sail rig was an afterthought, so you might imagine what that entailed! She has not had a proper mainsail yet, but will as soon as the handwork is done. Stay tuned!


























Newest to the fleet is the Ed Monk 15’-6” Knockabout, Lively. Lots of fun! A simple and attractive plywood skiff, with thoroughbred sailing characteristics, easy to trailer and launch - we are very likely to hear more about Lively in the months to come.

With a new mainsail, I may be tempted to race her, she's that good!
























The boat in the shed is one of Sam Devlin's original Egrets. This boat was given to me this year and I think she deserves some attention. Can't say much about her yet, but when she's re-launched you'll be the first to know.

























One of the first boats I built is the 13 foot light dory Otter. A dory is measured on it's bottom. Otter is 15 feet over-all, built of fir plywood with stitch and glue construction.





After 30 years and many changes and upgrades, I gave her away this year. She's a great little boat and never shipped a single drop in all the trials I've put her through.

Her new owner has dressed her in all the finest.

When I see her again, I'll let you know...











This is a 20 foot Old Town Freight Canoe named Woody.

No, I didn't name her.

I had this idea that I would take this rare old canoe and fit her with oars, since the bursitis in my shoulders makes paddling very painful. She would be more like a peapod. I think this would have been a good idea, but as the boat's old luster began to surface, it became apparent that the canoe should remain true to it's heritage.

A 20' wooden freight canoe is a rare find.


As it turned out, Woody went back to it's previous owner who was intrigued by the fine looking boat that emerged from the dust.















The little dory and the canoe gave way to plans for new boats. (Can't have enough boats!;-)






First up on the list of new construction is an 18 foot Chesapeake Light Craft kayak. The plans are on my desk.












Sanpierota plans! I can't tell you how excited I am about this new boat. The sanpierota is an ancient Venetian design, and is still occasionally found there.
But I doubt if there is a sanpierota in the US, so I hope to be the first. The plans came from Gilberto Penzo in Italy and are notated in Italian and lofted out in metric. I don't read Italian and have never built a boat to metric specifications, so this boat is scheduled for next year to give me time to get up to speed!









Doryman is behaving like the kid in the proverbial candy store.

Too much Fun!

If I had a better memory, we could take a journey back to all the boats I've owned and built, but you've been given a reprieve for now...
.

Saturday, April 9, 2016

Doryman's Boatyard





As you might guess, the restoration of Belle Starr is at the top of the list. Working outside definitely has it's drawbacks and I've known all along that when spring weather approached, there would be a frenzy of activity. Nothing new there - to a sailor, the weather dictates everything.






Belle Starr is a happy boat. She's very near being ready to launch. All that remains are the fiddly bits, the structural work is complete. In fact, I have a friendly wager with a fellow sailor about who will launch first. Sometime late this month is my best guess. Despite being very anxious about splashing her, I want Belle Starr to be better than before her accident. This view of the starboard side was a ragged hole not too long ago.







The starboard side from the interior. Those pesky, leaky deadlights have been re-bedded at last!
There are some upgrades this time around. New winches grace the deck to assist in keeping the halyards tight. I'd like to have winches for the new genny too, but that will have to wait. The interior is handsomely reworked. With the boat completely empty, refinishing everything was imperative. It's very rewarding to sew up loose ends. For instance, there will be no more hauling and stowing plastic jugs of water. A rudimentary water system featuring a bladder tank and hand pump now simplifies that task.






An unexpected bonus to this tragedy was revealed while repairing the rudder, which was snapped off at the waterline.


The two sets of gudgeons and pintles that were underwater were corroded to the point that they could have failed at any time. I'm not a welder (at times like this, I wish I was...) so having new hardware fabricated has suddenly become one of the most costly elements of this repair. It will be good to know that the rudder is once again firmly attached to the boat. Losing steerage is a sailor's nightmare.






Meanwhile, look at what followed me back to the shop... an Old Town canoe. I've had my eye on this beauty for a decade. I haven't had a chance to look up the serial numbers yet, but she's probably in the neighborhood of seventy years old.

My friend Rick Johnson finally took pity on me and we loaded her down from the rafters of his shop. She now graces the rafters of mine. It could be a while before she gets the attention she deserves, but when she does, you'll be the first to know.